Chromatography Column Tools
Optimize Technologies EXP Trap Cartridge, 3.0mm x 5mm, 3.0µm EXP, SCX, 3pk
The Hand-Tight EXP™ Trap Column is rated to 20,000+ psi. This unique design connects directly to any injection valve (with 10-32 threads) or in-line with 1/16” tubing for unparalleled convenience and efficiency. The EXP™ System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. Free-Turn™ architecture allows users to change cartridges by hand without breaking fluid connections on the holder inlet/outlet. The EXP™ Trap Column family now offers packed beds available in 2, 5, 10, 15, 20 and 30mm lengths with diameters ranging from 1-4.6mm and bed volumes from 1.6-600µL. Please contact your representative directly if you're interested in a length other than 5mm.
Grainger Threading Tool 3/16 Carbide
The Micro 100 Threading Tool is a high-speed steel threading tool with a 3/16 inch shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 5 inches and it has an American National Standard stub length of 2-1/2 inches. This durable tool is made in the USA and well-suited for production threading applications. The Micro 100 brand is known for quality and precision. This threading tool allows efficient threading operations.
Perkin Elmer US LLC Alumina Injector, 0.80 mm I.D., for Avio
This Alumina Injector is for use with Avio 200/500 ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
Grainger Threading Tool 1/4 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter and 1/4 inch maximum depth of thread. It has a 60 degree threading point angle and can cut unified coarse right hand threads from 4-56 to 1/4-20. The overall tool length is 3 inches and it weighs 0.04 lbs. This single point threading tool is made in the USA out of C2 grade high speed steel for good wear resistance. It is designed for use on lathes, screw machines, and CNC lathes for both production threading and general purpose workshop threading applications.
Grainger Threading Tool 5/16 Carbide
The Grainger 5/16"-18 carbide straight flute machine tap is made of solid carbide for durability and has straight flutes for efficient chip removal. It is designed for hand or machine tapping of ferrous metals like steel, cast iron, and alloy steel. This tap features a standard plug chamfer and is suitable for blind holes. It has a spiral point tip to guide the tap and reduce thrust and friction. The tap has a bright finish for visibility and comes in a 3" length that can be used by hand or in a machine.
Grainger Threading Tool 1/4 Carbide
The Grainger 16T170 is a 1/2 HP, 115V, 1725 RPM, 56C frame, open drip proof, single phase, ball bearing electric motor. It has a 1/2" diameter shaft with a 1/4" keyway and features a cast iron frame construction. This motor is thermally protected and suitable for continuous duty applications. With a NEMA design B configuration, it can provide 0.37 kW of output power. The 16T170 has a standard TEFC enclosure and meets IEEE 841 standards. This electric motor weighs approximately 25 lbs.
Analytical Sales & Services Flangeless Nut Extender Tool
This item has a minimum order quantity of 4 per supplier requirements. FLANGELESS NUT EXTENDER TOOL -
Trajan Scientific PEEK TUBING CUTTING REPLACEMENT BLADE PK5
PEEK TUBING CUTTING REPLACEMENT BLADE PK5
Waters Corp Waters Interface Cable, D26 Male to Female, 21 in., ALLIANCE Systems
This interface cable is a replacement control cable assembly designed for use with ALLIANCE Systems.
- Replacement control cable assembly
- D26 to D26 male to female connectors
- Measures 21 in. long
- Used with ALLIANCE systems
- Connects to the column heater/cooler